The basis of the continuous process of commodity handling is a tuned transport system.
They are designed for the transport of bulk materials in the vertical direction.
They are made of galvanized sheet metal, abrasion-resistant plastic hoppers and hoppers are standard.
They are delivered in outputs of 5–120 t / hour.
They are designed for the transport of cereals and oilseeds and work in a horizontal position or. at an angle of up to 45 °. They are made of galvanized sheet metal and the standard for these conveyors is a plastic bottom and hoppers.
We supply redlers in the following versions:
Can be ordered in outputs of 15-220 t / hour
The material is transported by turning the auger in the chute resp. trumpets. The threads move the material along the bottom of the trough to the hopper, through which the material falls out.
The screw and the chute are made of galvanized sheet metal with a thickness of 3-10 mm according to customer requirements.
They are delivered in outputs of 3-100 t / hour.
It is used for the transport of bulk materials, feed mixtures and grain in a horizontal and oblique position. It has a circular or trough shape.
Available with receiving basket, hopper or with pick-up connector.
The drive units can be connected to a tractor drive, an electric motor or an internal combustion engine.
Output 5–270 t / hour.
The HUTCHINSON HX 130 Grain Auger swing-away conveyor is equipped with a scissor lift frame, a steel lattice beam and a low-profile hopper.
It achieves an output of up to 320 t / hour.
The drive provides the tractor engine.
Trac Mass-ter is a unique conveyor. It can be both stored and unstored in order to maximize efficiency and minimize wear. The low-speed auger with a large diameter in the hopper in the receiving basket feeds the grain onto an inclined chain conveyor, where the blades carry the material quickly and gently from the receiving to the outlet. It is versatile, it can be used both horizontally and in an inclined (inclined) position, on farms and in commercial operations. It is well suited where there are requirements for low engine power, quiet operation, gentle handling and long service life. Trac Mass-ter HUTCHINSON provides output of up to 270 t / h.
The BATCO FX1545 mobile belt conveyor is designed for transporting dry and wet materials in an oblique direction. It has remote controls, the drive provides an internal combustion engine and provides an output of up to 388 t / hour.
The BATCO BCX2 1515 mobile belt conveyor is designed for the transport of dry and wet materials in an oblique direction, providing an output of up to 166 t / hour.
The SUDENGA portable auger drive over driven by an electric motor achieves an output of up to 180 t / hour.
This drive over hopper has an output of up to 216 t/hour.
A grain pump, sometimes a grain loop, is a proven transportation technology from Hutchinson in the United States.
Finishing augers help to clean the silos from the remains of stored material.